Tag Archives: 5.0

Autocross – August 16, 2008

It actually took me a bit longer to get back out to an autocross than I’d hoped. At the last event, the left rear axle ate the bearing. I knew the axles were bad, but the event finished them off, as well as causing some serious popping from the right front ball joint. After a few weeks of my mechanic not returning my phone calls (I’ve since found a new guy), I decided to do the work myself. Continue reading

A-Arm Rebuild

Due to the amount of cost and work it takes to do an a-arm rebuild, swapping bushings and ball joints, you can’t beat the price of a set of new Ford Racing arms with the low friction ball joints and stiffer bushings (part # M-3075-A). However, if you’re a glutton for punishment (as I seem to be), and you’re dead set on the improved geometry afforded by a set of offset bushings, prepare your self. Now, it probably would have gone a lot quicker and smoother had I worked on a cooler day, but I couldn’t change the weather and I was anxious to get the car to the next autocross. Continue reading

Fabricating a Rear Seat Delete Kit

In an effort to lighten up the interior I’d removed all sound deadening, as well as the rear seat. For what it’s worth, the 93 Cobra R was sold without a rear seat, which makes this a legal modification for autocrossing my car in Street Prepared. The 93 R had a simple piece of carpet covering the rear seat area, but I wanted something a little bit more sanitary looking. Off to eBay I went, and ordered a set of Betr Rear Seat Delete (RSD) plans from MyPonyHauls. Continue reading

Gutting a Fox’s Innards

As the Mustang takes another step toward becoming a dedicated autocrosser and loses it’s status as a semi-daily driver, certain niceties are no longer a necessity. A little extra road and engine noise, a little extra heat, and the option of hauling around more than a single passenger become less of an issue. Insulation, sound deadening and the rear seat are sacrificed in an attempt to make this car compete for Biggest Loser. So, what’s it all weigh? Continue reading

Autocross School and "The Tortoise and the Hare" Autocross – March 29-30, 2008

It’s been a long time coming, and I’ve finally gotten my ducks in a row and got a car together so that I can go out and play. With my first event being a school, I started things off right.

The school was put on by CENLA Region of the SCCA. It was a great way to get some seat time, dust the cob webs off the driving gloves, and shake down any bugs in my car. They set a cap of 36 drivers, which were divided into three groups of 12. Each group of 12 was then divided into six drivers and six course workers, which would swap half way through the heat. The three groups each took turns on three different courses, and then everyone got a short autocross at the end of the day. As far as I’m concerned, I got to run the courses in the most favorable order, from good, to better, and finished with the best.

Continue reading